| SmartSet |
Item 3 of 5 |
 |
|
Display: monochrome LCD, 4 lines by 20 characters per line entry keypad 5x4.
Manual keypad: 5x4.
Digital Inputs: 32 per module of 120 VAC or 24 VDC, optically isolated, maximum of 64 inputs.
Digital Outputs: 16 per module of 120 VAC or 24 VDC, unfused, maximum of 48 outputs.
Temperature Control: 4 zones PID or proportional control for type J thermocouples, with auto tuning.
Analog inputs: 4 channels, including 3 for positioning and 1 for pressure.
Analog outputs: 4 channels with 16 setpoints each. Position comparators: 32.
Programmable selector switches: 24, with 2, 4, and 8 positions each.
Timers: 24, each with 5 digits (999.99).
Counters: retentive counters with 6 digits (999999).
Operating temperature range: 0' - 50' C.
Power requirements: 105 - 135 VAC at 50 - 60 Hz IEC 801-4 noise immunity.
Finally, a control package that doesn't cost more than the machine!
Unfortunately, many molders face the situation where outdated control systems require them to replace the whole machine, or buy cheap controls that don't do enough, not any more.
The SmartSet(TM) controls are the smartest way to get the most control for the least amount of money. Features like linear positioning and closed loop process control, normally found only on higher priced control systems, are available with SmartSet controls.
Now you can place new controls on your machine for money that's probably in your maintenance budget! And these are not generic PLC's that do not control all the variables you desire. The SmartSet(TM) will replace all your relay logic, timers, counters, function switches, and temperature controls, you name it (for less than $3000 per machine).* For a little more, you can add higher end functions like closed loop injection process control. Payback is lighting fast. And, with the SmartSoft(TM) suite of Windows(R) based programming tools, you can point and click your way to integrating your own new system to your machine, at no extra cost.
* Don't worry, this fine print has good news: For $2,950, the SmartSet Genius model provides 32 digital inputs and 32 digital outputs, PID barrel temps with auto-tuning, sequence logic, timers, counters, funtion switches, linear positioning, analog outputs for proportional valves, and the complete set of SmartSoft programming tools for the screens and ladder logic.
As outrageous as it seems, for the price of a typical 200 ton injection molding machine, you can put new SmartSet controls on 35 machines.
Solid Controls, Inc., 2155 Niagara Lane N, Suite 110, Plymouth, MN 55447 USA
Phone: 800-899-5586 Fax: 763-476-5888 E-mail: info@solidcontrols.com
Copyright © 2001, Conviveon Corporation. All rights reserved.